SR3028 Heat Conduction in Fluids engineering educational equipment Heat Transfer Experiment Equipment The unit shall perform the following experiments and investigations: Learning Objectives / Experiments steady heat conduction in gases and liquids: determine the thermal resistance of fluids determination of thermal conductivities k for different fluids at different temperatures transient heat conduction in fluids: interpret transient states during heating and cooling introduction to transient heat conduction with the block capacity model Specification [1] investigation of the thermal conductivity of common fluids, e.g. water, oil, air or carbon dioxide [2]concentric annular gap between 2 cylinders containing the fluid being studied [3]inner cylinder, continuously electrically heated [4]water-cooled outer cylinder [6]due to integrated microprocessor-based instrumentation no additional devices with error-prone wiring are required heating power: 350W temperature limitation: 95°C Heat transfer area: 0,007439m² Annular gap height: 0,4mm average diameter: 29,6mm Inner cylinder mass: 0,11kg specific heat capacity: 890J/kg-K Measuring ranges temperature: 2x 0...325°C heating power: 0...450W Dimensions and Weight LxWxH: 670x350x480mm Weight: approx. 18kg Material of construction: stainless steel
