whatsapp: 0086-15153112822
Fluid Mechanics Lab Equipment

Studies In Hydrology educational lab equipment Hydrodynamics Lab Equipment

Item No.: SM 165
SM 165 Studies In Hydrology educational lab equipment Hydrodynamics Lab Equipment
INQUIRY
Description
SM 165 Studies In Hydrology educational lab equipment Hydrodynamics Lab Equipment

1. Description
In civil engineering, studies in hydrology are conducted in connection with the design, construction and operation of hydraulic engineering systems and water management functions. The studies focus on topics such as seepage and flow of water in the soil and the use of groundwater resources.
 

It can be used to study seepage and groundwater flows after precipitation. Variable precipitation density and areas and different groundwater supply and drain possibilities allow a wide variety of experiments.
 

The precipitation element consists of two groups of three nozzles. The core element is a sand-filled, stainless steel experiment tank with inclination adjustment. Water can flow in (groundwater) or out (drainage) via two chambers on the side. The experiment tank is separated from the chambers by fine mesh screens. To study the lowering of groundwater, two wells with open seam tubes are available. Supply and water drain can be opened and closed, thus allowing a wide variety of experimental conditions.
 
At the bottom of the experiment tank there are measured connections to detect groundwater levels, which are displayed on 19 tube manometers. The water supply is controlled by a valve and read on a flow meter. The water drain is determined by a measuring weir.
 
2. Technical details
Specification
Investigation of precipitation-discharge relationships, storage capacity of soils, seepage flows and groundwater flows
Closed water circuit
Inclinable stainless steel experiment tank contains 19 measuring connections to detect groundwater levels, transparent splash guard and screens for separating the chambers
2 wells with open seam tubes in the experiment tank
Precipitation device with 8 nozzles, adjustable
Water supplies and drains can be selected individually
Transparent measuring tank (flow)
Instruments: tube manometers (groundwater), flow meter (supply) and measuring weir in the measuring tank (drain)
Technical data
Experiment tank
Area: 2x 1m2, depth: 0,2m
Max. sand filling: 0,3m3
Inclination adjustment: -2,5...5%
Precipitation device
8 nozzles, switchable in 2 groups of 4 nozzles
Flow rate per nozzle: 1...4,7L/min, square spray pattern
Pump
Power consumption: 0,55kW
Max. flow rate: 2000L/h
Storage tank, stainless steel: content 180L
 
 
Measuring ranges
Pressure: 19x 0...300mmWC
Flow rate:
1x 150...1700L/h (water supply)
1x 0...1700L/h (water drain)
 
230V, 50Hz, 1 phase
230V, 60Hz, 1 phase; 120V, 60Hz, 1 phase
UL/CSA optional
 
Required for operation
Sand (1...2mm grain size)